Anycubic Photon S – DLP 3D printer

3,949.00 DKK Ekskl. moms: 3,159.20 DKK

Tilgængelig på restordre

Kategori:

Beskrivelse

Anycubic Photon S – DLP 3D printer

The original Anycubic Photon was a phenomenal success, hitting the mark as an affordable hobbyist resin printer like no other. Excellent print quality and simple user operation made it a go-to for those in need of detailed prints and cost less. Photon slicer brings extraordinary using experience. A 30M stl file will minutes when you use a open-source slicer. While photon Slicer will finish this job wthin 1 minutes.

Anycubic Photon-S Highlights

  • 2.8″ Full Color Sensitive Touch Screen for real-time previews of print status
  • Inbuilt Offline printing
  • Rapid Slicer- Photon S Workshop.It is superior in terms of slicing speed and operational experience. Ultimate Slice Speed
  • Matrix UV Lights Upgraded UV Module for stable signal transmission , efficient utilization of resin energy and Amazing Print/cure results
  • Dual Z Axis Linear Rail for stronger stability.
  • Anti-aliasing built in to firmware smooths the edge of pixels making the print resolution higher than it actually is.
  • 2K LCD Masking Screen 2560*1440(2K) HD masking LCD gives very fine printing details down to few micrometers
  • Aluminum Build Platform to enhance adhesion
  • Creative structure offers more easiness to leveling: Lower the platform down to the screen; Feel the resistance when pulling the paper in-between; Tighten one screw; Leveling done
  • Dual Filtration System: Inner air-purification system with activated carbon to filtrate bad smell and keep air clean. Dual Fans for Ventilation.
  • Guaranteed for Noise free 3D Printing.
  • Suitable for UV Resin.
  • Anycubic Photon-S offers a SD card reader and USB connectivity

PrimaCreator Resins works great with Photon S.

 

GENERAL

  • Printing Technology: LCD-based Masked Stereolithography (MSLA)/LCD Shadow Masking
  • LCD: 5.2-inch 2K
  • Build Volume: 115 x 65 x 165 mm
  • Z-Layer Resolution: 10 microns (recommended)
  • XY Resolution: 47 microns
  • UI: 2.8-inch Color TFT touchscreen
  • Connectivity: USB
  • Build Platform Leveling: Manual
  • Materials: Resins suitable for 405nm LCD-based printers

SOFTWARE

  • Bundled software: Photon Workshop
  • File types: STL

WEIGHT AND DIMENSIONS

  • Weight: 5.9 kg
  • Dimensions: 230 x 200 x 400 mm

Whats in the Box:

Everything you need to start printing is included

  • Anycubic Photon DLP printer
  • Resin 250ml bottle
  • USB Memory
  • Power Cord
  • Power Supply
  • Scraper
  • Tool kit
  • Rubber gloves
  • Mask
  • FEP Film

Yderligere information

Vægt 7 kg
Størrelse 40 × 30 × 40 cm

Anmeldelser

Der er endnu ikke nogle anmeldelser.

Kun kunder, der er logget ind og har købt denne vare, kan skrive en anmeldelse.