View larger PVA – 1.75mm – Soluble Support

499.00 DKK Ekskl. moms: 399.20 DKK

Kategori: Varenummer: PVA - 1.75mm

Beskrivelse

PVA –  1.75mm  – Soluble Support – Kuraray MOWIFLEX

0.5kg Spool

From Japanese Kuraray we have this high quality PVOH (polyvinyl alcohol) Support filament

Mowiflex™ is a water soluble thermoplastic material based on polyvinyl alcohol that enables printing of complex structures even those containing moving parts in one. The support structures are easily dissolved in cold water.

Features

  • Soluble in cold water, dissolves better than PVA
  • No organic solvents needed
  • Low moisture absorption
  • More filament stiffness then PVA
  • High melt flow
  • Adhesion to PLA, PVB, PA, TPU
  • Biodegradable, TUV certificated

Mowiflex™ should be printed between 190-210 °C, do not exceed a nozzle temperature of 220 °C and reduce nozzle temperature to <170 °C when temporarily idle. Don’t let the filament in the extruder when idle. Set the heated bed at about 25-70 °C.
Suggested printing speed: 20-50 mm/s.
Keep away from moisture and store in a sealed aluminum bag. Damp material can be dried at 60-80 °C for 6-8 hours in a circulating air dryer.

Yderligere information

Vægt 0.7 kg
Størrelse 25 × 25 × 10 cm

Anmeldelser

Der er endnu ikke nogle anmeldelser.

Kun kunder, der er logget ind og har købt denne vare, kan skrive en anmeldelse.